|
1.
Exploratory Data Analysis
1.3. EDA Techniques 1.3.3. Graphical Techniques: Alphabetic
|
|||
|
Purpose: Improve the estimate of frequency in sinusoidal time series models |
In the frequency analysis of time series models, a common
model is the sinusoidal model:
is the amplitude,
is the phase shift, and
is the dominant frequency. In the
above model, and
are constant, that is they do
not vary with time ti.
The complex demodulation phase plot
(Granger, 1964)
is used to improve the estimate of the frequency (i.e.,
If the complex demodulation phase plot shows lines sloping from left to right, then the estimate of the frequency should be increased. If it shows lines sloping right to left, then the frequency should be decreased. If there is essentially zero slope, then the frequency estimate does not need to be modified. |
||
|
Sample Plot: |
This complex demodulation phase plot shows that:
|
||
|
Definition: |
The complex demodulation phase plot is formed by:
|
||
| Questions |
The complex demodulation phase plot answers the following
question:
|
||
| Importance of a good initial estimate for the frequency |
The non-linear fitting for the sinusoidal model:
, is obtained from
a spectral plot.
The complex demodulation phase plot is
used to assess whether this estimate is adequate, and if it
is not, whether it should be increased or decreased. Using the
complex demodualtion phase plot with the spectral plot can
siginificantly improve the quality of the non-linear fits
obtained.
|
||
| Related Techniques |
Spectral Plot Complex Demodulation Phase Plot Non-Linear Fitting |
||
| Case Study | The complex demodulation amplitude plot is demonstrated in the beam deflection data case study. | ||
| Software | Complex demodulation phase plots are available in some, but not most, general purpose statistical software programs. Dataplot supports complex demodulation phase plots. | ||