|
2.
Measurement Process Characterization
2.3. Calibration 2.3.3. What are calibration designs?
|
|||
| Uncertainty analysis follows the ISO principles | This section discusses
the calculation of uncertainties of calibrated values from calibration designs.
The discussion follows the guidelines in the section on
classifying and combining components of uncertainty. Two types of evaluations are covered.
The latter includes, but is not limited to, uncertainties from sources that are not replicated in the calibration design such as uncertainties of values assigned to reference standards. | ||
| Uncertainties for test items | Uncertainties associated with calibrated values for test items from designs require calculations that are specific to the individual designs. The steps involved are outlined below. | ||
| Outline for the section on uncertainty analysis |
| ||
